Stormlight miniatures 3d prints

[The flying spider he/him]

I didn't participate in the campaign myself but I did see that the 3d files were sent so anybody who printed them can you please share your prints here

Edited October 23, 2023 by The flying spider

[The flying spider he/him]

My friend printed me these after I figured out I can add the digital rewards pack to my backerbit which was pretty nice to find out so just want to show a few.

Some are still not printed but that because my friend ran out of filment so he's getting more and I'll post then.

The urithiru print is actually one that he printed for me a few months ago and you can find it for free on the 3d models sites. (Sorry my camera is pretty trash)

Edited December 22, 2023 by The flying spider

[PandACT he/him]

Wow. The resin printer really brought out all the details, especially on the chull (unless it was supposed to have flora too?)...  today I also found out that Rysn was revealed as a stretch goal, and the concept art looks exactly like what I imagined. I never got around to printing the ones I made on TinkerCAD, but now I don't have to because other artists already nailed the details and accurately portrayed Urithiru too  I look forward to seeing all the prints and painting progress!

Edited December 23, 2023 by PandACT

[Pineap-spider Pineapple/Spider]

Where can I get those files, if possible? 

[The flying spider he/him]

35 minutes ago, Pineap-spider said:

Where can I get those files, if possible? 

Preorder Stormlight Premium Miniatures on BackerKit the digital rewards pack

[The flying spider he/him]

So finally got my miniatures here's a look at them

[AGV]

On 1/28/2024 at 8:27 PM, The flying spider said:

So finally got my miniatures here's a look at them

these are printed or from the kickstarter? I'm searching the STL so I can print the minis and if i don't like the result print it again.

[The flying spider he/him]

The ones on the books are from the kickstarter but the one next to urithiru are stl.

[TruthwatchingRadiant He/Him]

So far as I’ve found you can only get the generic pack (Chulls, soldiers, shardbearers, etc.) of stls from the backerkit stuff. Unless someone has some of the files they’d like to share. I personally prefer the pre-supported versions of the figures.

[TruthwatchingRadiant He/Him]

Hey guys! As you probably know by now, I’m a big Stormlight fan. I wasn’t involved with the Kickstarter so I’m pretty sure there’s no way for me to get the Generic pack 3D printable STLs.You know, the shardbearers, chulls, etc. So I’m wondering if anyone has some they could text to me. If someone preorders the STLs, and when fulfillment comes, they’d just give you a link to your backerkit pledge manager thing to download them over there. Needless to say, I didn’t make any sort of pledge, even if I did preorder something I probably wouldn’t be able to access them. If someone has info on whether I can buy them myself I will, but if that’s not possible, then Brotherwise isn’t making any money off of me buying their stuff, so if I can’t buy them myself, then maybe one of you could share your STL collection with me. My number is (580) 919-3208, if you’d want to help that would be appreciated. Thanks!

[The flying spider he/him]

Yeah there supposed to be better but I'm also super excited for the new 19 STLs especially the white spine and husked one. 

[TruthwatchingRadiant He/Him]

 

I’m looking for all the Stormlight RPG miniatures 3D printing stls, the Cosmere RPG Collection pack (the one with 20-ish minis) would be nice, and I also received the miniature stls from the generic pack, you know, the ones with Shardbearers, soldiers, etc. (by the way, thank you for those ones! [not gonna mention who gave ‘em to me cause I don’t know if they want the attention] ) but they’re not the updated version. (They updated the all stls to have better supports and the option to print the bases separately.) I would appreciate the updated version, but if that isn’t available, that’s ok.

** All of these would be for personal use only.**

I didn’t back the Kickstarter and the Backerkit preorder is closed, (to the best of my knowledge) and they will not be available later, so I can’t get them myself.
If anyone has the stls, and would be open to sharing them with me, dm me and I guess we’d go from there.

Dragonsteel and Brotherwise Games won’t loose any money from me getting these files from someone who already has them, because there’s no way for me to get them by myself. My intentions are good, and I promise I will NOT monetize or illegally distribute these files.
I’m also looking for the Bridge Four display stand STL from the Generic pack. Thanks!

 

Edited August 10, 2025 by TruthwatchingRadiant

[codymill]

On 7/26/2025 at 9:05 AM, TruthwatchingRadiant said:

 

 

I’m looking for all the Stormlight RPG miniatures 3D printing stls, the Cosmere RPG Collection pack (the one with 20-ish minis) would be nice, and I also received the miniature stls from the generic pack, you know, the ones with Shardbearers, soldiers, etc. (by the way, thank you for those ones! [not gonna mention who gave ‘em to me cause I don’t know if they want the attention] ) but they’re not the updated version. (They updated the all stls to have better supports and the option to print the bases separately.) I would appreciate the updated version, but if that isn’t available, that’s ok.

** All of these would be for personal use only.**

I didn’t back the Kickstarter and the Backerkit preorder is closed, (to the best of my knowledge) and they will not be available later, so I can’t get them myself.
If anyone has the stls, and would be open to sharing them with me, dm me and I guess we’d go from there.

Dragonsteel and Brotherwise Games won’t loose any money from me getting these files from someone who already has them, because there’s no way for me to get them by myself. My intentions are good, and I promise I will NOT monetize or illegally distribute these files.
I’m also looking for the Bridge Four display stand STL from the Generic pack. Thanks!

I'm looking too, please share if you find them

[TruthwatchingRadiant He/Him]

If I were to get them for free from someone who bought them, I couldn’t share them with anyone else, because I didn’t pay for them myself.

[Seerav]

On 7/26/2025 at 7:05 PM, TruthwatchingRadiant said:

 

I’m looking for all the Stormlight RPG miniatures 3D printing stls, the Cosmere RPG Collection pack (the one with 20-ish minis) would be nice, and I also received the miniature stls from the generic pack, you know, the ones with Shardbearers, soldiers, etc. (by the way, thank you for those ones! [not gonna mention who gave ‘em to me cause I don’t know if they want the attention] ) but they’re not the updated version. (They updated the all stls to have better supports and the option to print the bases separately.) I would appreciate the updated version, but if that isn’t available, that’s ok.

** All of these would be for personal use only.**

I didn’t back the Kickstarter and the Backerkit preorder is closed, (to the best of my knowledge) and they will not be available later, so I can’t get them myself.
If anyone has the stls, and would be open to sharing them with me, dm me and I guess we’d go from there.

Dragonsteel and Brotherwise Games won’t loose any money from me getting these files from someone who already has them, because there’s no way for me to get them by myself. My intentions are good, and I promise I will NOT monetize or illegally distribute these files.
I’m also looking for the Bridge Four display stand STL from the Generic pack. Thanks!

 

Yea, these look so good but can't find them anywhere :(

[Erremin]

The STLs are available from: https://www.drivethrurpg.com/en/product/534090/cosmere-rpg-stormlight-stl-pack and https://www.drivethrurpg.com/en/product/534166/cosmere-rpg-stormlight-army-builders-pack?src=also_purchased 

The first one is from the current TTRPG campaign, and is 25 dollars (which for a pack of 21 STLs is an absolute steal) and the second one is 20 dollars, but contains all the STLs from the first campaign (so not the named characters, but 3 generic Alethi (kholin) soldiers, 3 parshendi warform, 4 shardbearers, and 1 chull).

Happy printing and painting!

@TruthwatchingRadiant@Seerav @Pineap-spider @codymill

Edit: to tag the people previously in the thread

Edited September 2, 2025 by Erremin